Before you order a 7Plus RO filter, it is best to know what your home needs to receive it: water supply and drain lines, a power outlet, and a place for the device and the tank. This saves you and the plumber time and surprises on installation day. In this guide we give you a simple preparation checklist and what is recommended to check after startup.

We are talking here about the 7-stage RO water filter with a 24 V pressure pump and a tank.

Key takeaways

The device needs a cold water supply, a drain line and a nearby power outlet for the pump
We do not offer an installation service in the store and we recommend having a plumber do it
Choose the location before installation and make sure it can fit the device and the tank and stays easy to reach
Follow the manufacturer’s instructions supplied and, after startup, check for leaks
Note the installation date, because it is the basis for the cartridge replacement dates

What does the device need?

The cold water supply: this is where the water enters the device.
A drain line: because a reverse osmosis unit discharges part of the water, loaded with the salts the membrane separated.
A nearby power outlet: the 24 V pressure pump needs electricity.
A place for the device and for the tank: usually under the kitchen counter or beside it.

How to choose the location?

Think about three things: closeness to the cold water supply and the drain, a nearby power outlet that does not get splashed, and how easy it is to reach the device when the cartridge replacement dates arrive. A cramped spot that cannot be opened makes maintenance tiring.

Why do we recommend a plumber?

We do not offer an installation service in the store, and we recommend having a plumber do it. The job involves connecting to the water supply and the drain and powering the pump, and a mistake can cause a leak or damage the device. In every case, follow the manufacturer’s instructions supplied with the device.

What to tell the plumber?

That they will be installing a reverse osmosis device with a 24 V pump, and that the instructions come with the device.
Where the device and the tank you chose are located.
That they will need a drain line, in addition to the cold water supply.
Where the power outlet that will run the pump is.

After installation

After reassembly, run the device for a few minutes and check that there are no leaks at the connections. Pay attention to what the manufacturer’s instructions say about first startup. The next day, take a look under the sink to make sure the area is still dry.

Note the date

Write the installation date on a sticker near the device: it is the basis for the cartridge replacement dates. The first three cartridges after 6 months, those of all seven stages after 12 months, and the membrane between 12 and 18 months. Price details are in the 7Plus RO filter maintenance schedule.

Common mistakes to avoid

Choosing a spot far from the power outlet or the drain.
Putting the device somewhere you cannot reach to change the cartridges.
Forgetting the drain line when planning the installation.
Ignoring the manufacturer’s instructions supplied.
Not noting the installation date.

How to order the filter

You can order from the home water filter with pressure pump page. Delivery is free to all cities in Morocco and payment is on delivery. If you need help preparing for installation, message us on WhatsApp.

Conclusion

Prepare the cold water supply, the drain, the power outlet and the location before installation, use a plumber, follow the manufacturer’s instructions, check for leaks and note the date.

FAQ

What does the 7Plus RO filter need for installation?

The cold water supply, a drain line, a nearby power outlet for the pressure pump, and a place for the device and the tank.

Do you offer an installation service?

No, we do not offer an installation service in the store and recommend having a plumber do it.

Does the filter need electricity?

Yes, the 24 V pressure pump needs a nearby power outlet.

Why does the device need a drain line?

Because a reverse osmosis unit discharges part of the water, loaded with the salts the membrane separated.

What should I do after installation?

Run the device for a few minutes and check for leaks, follow the manufacturer’s instructions and note the installation date.

Is delivery free?

Yes, delivery is free to all cities in Morocco and payment is on delivery.